Concrete mixer 500L vertical cement mixer detailed introduction

The two-layer mixing bucket is mainly used to mix cement mortar materials, and is mainly used for tunnel construction, excavation and maintenance, prestressed steel building construction and maintenance, coal mining engineering projects, dam construction, large and medium-sized highway bridges, and basic solution engineering projects for multi story buildings, as well as various underground construction projects and their work pressure grouting.

Two layer mixing drum continuous function type, with a part of the behavioral subject being an elongated round drum. The central government of the round drum is equipped with a horizontal shaft, which is driven by a motor through gear transmission. The circular barrel is divided into a feeding hopper, a metrological calibration bin, and a mixing bin. The horizontal axis is equipped with feeding blades, metrological calibration spiral blades, and mixing blades at the matching parts of each bin. Pre mixed granular materials are added through the feeding port, and are evenly fed into the mixing bin through the feeder blades and the measuring spiral blades. The inlet of the mixing bin is equipped with a water spray pipe head, which is measured and calibrated by an intelligent water meter to evenly discharge water. The mixture is stirred by the mixing blades and sent to the discharge port for discharge. The rotary mortar mixer can be flexibly equipped according to the construction site conditions. The feeding port can be immediately connected to the discharge tank for feeding, or a material bin can be installed at the feeding port for pouring into bags of granular materials. The feed inlet can be connected to a hoist or mortar pump. This type of mortar mixer can feed materials at the same time. In addition to mixing mortar, it can also mix pea gravel concrete and paper reinforced lime powder, with high production efficiency.

Blender User Manual:

1. Check that the mixing centrifugal impeller is turned properly to ensure that the discharge pipe does not leak water;

2. Add an appropriate amount of water, turn on the equipment for cleaning and moistening the paper barrel and pipes. After cleaning, release the calcium and magnesium ions from the paper machine;

3. Discharge no less than 80kg of water,

Mixing motor display

A two-layer mixer, also known as a mixing bucket, is used for continuous mixing of concrete mortar and cement mortar. The top layer is used for mixing and the next layer is used for storing the mixed slurry. It is a supporting facility for grouting machines and mortar pumps. This equipment allows the mortar to be mixed once and then fed into the storage bin for secondary mixing, making it less likely for the mortar to settle, causing concrete segregation, and ensuring a smooth and even feeding process, thus preventing clogging of the mortar. The mixer is lightweight and easy to install and transport. High and low-speed mixers, 1000 liter slurry storage tanks, customized mixing stations, various types of mixers